← All designs

Garden

Garden stake cap

A garden stake sleeve topped by a circular disc, with tie holes around its edge and gussets connecting the sleeve to the disc. A small vent lets trapped air escape while the cap slides onto the stake.

Garden stake cap print
Loading 3D model…

Drag to rotate · Scroll or pinch to zoom · Use the buttons with your keyboard.

Showing the original model.

Make it fit

Adjust the dimensions, then update the model. Your changes stay in this browser.

From 8 to 13.

From 0.2 to 1.

From 4 to 12.

Original model · dimensions in millimeters

Powered by OpenSCAD. Runtime license and source

Original files

Download original STL

Design license: Apache-2.0. Download any companion SCAD files listed above to use the source locally.

Printing & fit

  • Measure the actual stake diameter and tune clearance with a fit print.
  • Print disc-down with the sleeve pointing up; inspect the slicer before printing.
  • Starting setup: PETG, 0.20 mm layers, and 20–30% infill for light string tension.

Open the STL in your slicer to check orientation and supports before printing.